How do you fix a metal door that rubs on the bottom?

Tighten the hinge screws in both the door and the jamb. Snug them firmly, using a screwdriver rather than a drill to avoid stripping the screw holes. Screws magically work themselves loose over the years. If your door rubs near the top or drags on the floor, use a screwdriver, not a drill, to tighten the screws.

Why is my door binding?

Hinges may bind because the screws have been put in askew or because their heads are too large to fit flush in the countersinks in the hinge flaps. Binding can also be caused by hinge flaps that are set into the frame too near to the door stop or rebate. As the door is closed, the face presses against the stop.

What’s the cheapest way to fix a commercial door?

The less expensive option is to try using threaded inserts, which can provide a stopgap measure. A better choice would be a continuous hinge. The continuous hinge runs almost the entire length of the door and jamb, redistributing the pressure on the mounting screws and the leaves.

What to do if your door hinges are not working?

Test the operation of the lock hardware. If there is a problem extending the latch, check the level of the device, the opening and for possible warping in the door. The hinge screws are stripped or the doorframe or jamb is no longer securely attached. Through improper use or wear, hinges can become inoperable.

What to do if your door swing is not working?

Look at the floor and the header on the swing side of the door for evidence of door swing problems. The weather strip can be too thick to permit the door to close completely. Install the proper size and type of weather strip for the application. The door lock or exit device does not retract the latch and/or the bolt.

Are there any problems with a commercial door?

Finding solutions to commercial door problems requires taking the time necessary to discover the causes of the problems. Commercial doors range from high-end decorative entry doors equipped with automatic door operators to alley or loading dock doors that get opened using a cart, fork lift or pallet jack.