How to Prime an Oil Burning Furnace
- Turn off the power to the furnace.
- Check the furnace thermostat.
- Locate the bleeder valve on your fuel pump.
- Place a container beneath the bleeder valve to catch the fuel.
- Turn on the power to the furnace.
- Leave the bleeder valve open until a steady stream of fuel is established.
Do I need to bleed my oil furnace?
Bleeding the fuel line isn’t necessary unless the furnace doesn’t restart once you’ve put more oil inside. Typically, the reason for bleeding the furnace has to do with fuel levels: If you let the oil completely run out, that’s when the furnace may need extra help starting up again.
What’s the best way to bleed an oil furnace?
Bleed the Furnace. Use a small crescent wrench or pliers to slightly loosen the bleed screw. Make sure the screw remains on the pump and is only a little loose, so it doesn’t fall completely off when you bleed the oil furnace. Push the reset button on the furnace to turn it back on.
How to restart your furnace after running out of heating oil?
10 Steps to Bleed & Restart Your Furnace after Running Out of Heating Oil Before You Begin: Be Careful and Take Precautions Step 1: Fill the Fuel Tank Step 2: Hit the Reset Button Step 3: Turn off the Furnace Step 4: Collect Your Tools Step 5: Find the Bleeder Valve Step 6: Attach Nylon Tubing Step 7: Turn on the Furnace and Unscrew the Valve
Where do I Turn Off the bleed valve on my furnace?
Depending on your model, you may need to flip a switch near your furnace or turn it off at the breaker. You should also turn off the gas using the shut-off valve connected to the gas line. Locate the bleed screw on the fuel pump near where the fuel line comes in.
Where is the bleed fitting on an oil burner?
Locate the bleed fitting on the oil pump (on the left side of the oil burner where the oil line connects) it has a hex with a small hose barb protruding. Position your container directly below it.
