Steps

  1. Find the outlet closest to your device.
  2. Flip the manual switch button to “Timer On” and insert the timer into the outlet.
  3. Turn the dial clockwise to the current time.
  4. Pull or push the timer pins up or down around the dial to set the device time.
  5. Connect your electrical device to your plug timer.

How does a Westinghouse timer work?

The Westinghouse 2-outlet outdoor mechanical photocell timer features an automatic light sensor, which activates both outlets at dusk. The timer turns off at dawn or after 1-8 hours. It has weatherproof construction. Set the current time and date by holding the “Time” button.

How do you set timer for lights?

How to Set a Light Timer

  1. Plug the light timer up and ensure your bulb does turn on and is not blown out.
  2. Turn your switch to the auto setting.
  3. Set the pointer on your light timer to the current time.
  4. Press down the tabs located around your dial for the times you want the light to on.

How to set timer on Westinghouse yard stake?

6-outlet yard stake with dual timers all weather 6-outlet safety power station with digital photocell timer & programmable 7 day digital timer To set up Timer for the first time, plug in the timer for 10 minutes, then push the “Reset” button to clear all settings. While time appears in the LCD.

How to set time on Westinghouse 3 outlet?

Press the “Time” button to store the settings. Press and hold the “Mode” button to scroll between three different mode settings.

What can you do with a Westinghouse photocell timer?

A timer is also useful for controlling holiday decorations such as Christmas lights. One option is the Westinghouse 3-Outlet Outdoor Heavy Duty Digital Photocell Timer, which you can easily set up and start using. The Westinghouse photocell timer automatically controls up to three outdoor devices.

How do you set a timer on a TV?

To set up Timer for the first time, plug in the timer for 10 minutes, then push the “Reset” button to clear all settings. While time appears in the LCD.  Push “Set Time” button once. The time display will be flashing. (If the display stops flashing before you finish, just push “Set Time” again to continue.)