Technically, you can drive a truck with a broken leaf spring, but that doesn’t mean you should. Driving a truck with a broken middle leaf could render your vehicle unstable, but not too dangerous, provided you limit your driving to the nearest, safest places.

How much does it cost to replace a leaf spring shackle?

The average cost for a leaf spring replacement is between $874 and $928. Labor costs are estimated between $147 and $186 while parts are priced between $727 and $742. Estimate does not include taxes and fees.

Where is the shackle on a leaf spring?

Shackles exist at the rear end of each leaf spring within the suspension system . They connect the springs to your vehicle’s frame through an eye spring bolt.

What causes a broken leaf spring?

One of the most common reasons leaf springs break — along with many other vehicle components — is an overloaded truck. If you need to haul more than the load weight rating of your truck permits, you can add components to your truck to increase your hauling capacity and avoid damage to your leaf spring.

Can you replace one leaf spring?

A used leaf spring is generally interchangeable with a new one as long as both are the exact same size. Therefore, when you replace an old leaf spring with a duplicate, it will restore the performance of the truck to its earlier driving condition.

Can I replace just one leaf spring?

How long does it take to change a leaf spring?

If your leaf spring bolts are rusted, or you break a weld nut inside the uni-body, it can take anywhere from one hour to one day to change a leaf spring, depending on your available tools, mechanic skills, and previous experience changing Cherokee leaf springs.

How do you remove leaf springs?

Remove And Replace Leaf Springs Like A Pro

  1. Tools You Will Need.
  2. Step 1: Raise The Rear.
  3. Step 2: Remove The Shocks.
  4. Step 3: Remove The Leaf Spring Bracket And Parking Brake Cable.
  5. Step 4: Remove Lower Spring Plate.
  6. Step 5: Remove The Rear Shackles And The Leaf Spring.
  7. Step 6: Out With The Old.
  8. Step 7: Attach The Front Bracket.

How do you replace leaf spring shackles and bushings?

Steps to Replace Leaf Spring Bushings Block the front wheels and raise the rear with a jack under the third member, lowering the vehicle onto stands under the frame. Keep the jack under the rear end. Remove the bolt and lower the jack completely to perform the repair described below.

How do you remove a leaf shackle on a car?

Block the front wheels and raise the rear with a jack under the third member, lowering the vehicle onto stands under the frame. Keep the jack under the rear end. Do one end of a single spring at a time, removing the bolt securing the spring into the front pocket and/or the leaf spring and frame bolts on the rear shackle as required.

What kind of bolts are in leaf spring shackles?

If you do purchase a leaf spring shackle kit, make sure it comes with new Grade 10 (minimum) bolts. If not, I recommend you purchase them. Some leaf spring bushing replacement kits either don’t come with new nuts and bolts or the bolts they do come with are at best Grade 8.

How do you remove leaf springs from a car?

Lower the floor jack and use it to support the rear axle by placing it under the rear axle gear housing. Next you are going to start to remove the old leaf springs. Loosen the nuts and bolts on the leaf spring bracket U-bolts first then remove the U-bolts and place them to the side.